---
title: How to set up Authorize.Net for FraudLabs Pro Testing on WHMCS
description: This tutorial will show you how to set up the Authorize.Net (using sandbox account) payment gateway for FraudLabs Pro testing. Before starting the set up, you will need to have an active Authorize.Net sandbox account. If you do not have…
url: "https://www.fraudlabspro.com/resources/tutorials/how-to-set-authorize-net-for-fraudlabs-pro-testing-on-whmcs/"
updated: "2026-05-28"
category: "Payment & Chargebacks"
---

# How to set up Authorize.Net for FraudLabs Pro Testing on WHMCS

This tutorial will show you how to set up the Authorize.Net (using sandbox account) payment gateway for FraudLabs Pro testing. Before starting the set up, you will need to have an active Authorize.Net sandbox account. If you do not have it, please sign up for one at [https://developer.authorize.net/](https://developer.authorize.net/). We will also assume that you have already installed and activated the **FraudLabs Pro**fraud prevention module. You may visit [https://www.fraudlabspro.com/supported-platforms/whmcs](https://www.fraudlabspro.com/supported-platforms/whmcs) for the installation guidelines.

## Steps to setup Authorize.Net payment gateway

1. Login to your WHMCS admin area.
2. Click on the **Setup -> Payments -> Payment Gateways**.
3. Click on the **All Payment Gateways** tab. You should see a list of supported payment gateways available.
4. Click on the **Authorize.net CIM**box to activate the module.
5. You should see the below screenshot if the module was successfully activated.[![whmcs authorize.net settings](https://www.fraudlabspro.com/resources/wp-content/uploads/2017/10/whmcs-5.png)](https://www.fraudlabspro.com/resources/wp-content/uploads/2017/10/whmcs-5.png)
6. Enter your **Login ID** and **Transaction Key**. You can obtain this information from your Authorize.Net sandbox admin page. It is located under **Account -> Security Settings -> API Credentials & Keys**.[![authorize.net api and credentials](https://www.fraudlabspro.com/resources/wp-content/uploads/2017/10/whmcs-6.png)](https://www.fraudlabspro.com/resources/wp-content/uploads/2017/10/whmcs-6.png)
7. Please take note that **Transaction Keys** will not be displayed on the credential page. It's only shown during the initial sandbox account registration and it's assumed that you have safely kept it somewhere. However, you may regenerate the key if you had lost it on theÂ **API Credential & Keys** page.
8. For the **Validation Mode**, please make sure to set it to **Live**.
9. Enable the **Test Mode** for the testing purpose.
10. Click on the **Save Button** to save the settings.

You are now ready to run the testing using the Authorize.Net payment gateway. You may visit the following page for the test cards that are supported by Authorize.Net [https://developer.authorize.net/hello_world/testing_guide/](https://developer.authorize.net/hello_world/testing_guide/). Please take note that under the sandbox mode, no actual payment will be transacted. It's just a simulation to help you understand how the FraudLabs Pro module works with the Authorize.net payment gateway. Once you are satisfied with the test result and ready to go for live, please re-configure your Authorize.Net settings and also don't forget to uncheck the **Test Mode** checkbox.

 
